diff --git a/README.md b/README.md
new file mode 100644
index 0000000..2386803
--- /dev/null
+++ b/README.md
@@ -0,0 +1,132 @@
+# WireGuard Dynamic Policy Firewall
+
+A lightweight, robust, and highly dynamic iptables/ipset policy firewall engine designed to restrict and control WireGuard peer traffic (egress traffic mapping) straight from `wg0.conf`. 
+
+Rather than allowing all VPN clients to reach any part of your internal network, this tool isolates clients from each other by default and reads a custom `#Access` comment inside `wg0.conf` to automatically generate strict `iptables` rules and `ipset` whitelists per-client on the fly.
+
+---
+
+## 🎯 Architecture & Data Flow
+
+1. **`wg0.conf`**: The standard WireGuard configuration. Contains standard `[Peer]` configs alongside a custom `#Access` tag.
+2. **`wg-sync-policy.sh`**: Safely parses `wg0.conf` and generates a structured `/etc/wireguard/policy.json` atomically.
+3. **`wg-policy-engine.sh`**: Reads `policy.json` to generate robust rules, applying `iptables` and `ipset` directly to the system.
+4. **Watcher Daemon**: Monitors `wg0.conf` for changes via `inotifywait` and triggers the pipeline seamlessly when updates are made.
+
+---
+
+## 📁 File Locations & Installation
+
+All scripts must be placed in `/usr/local/bin/` and made executable. 
+
+| File | Location | Description |
+|------|----------|-------------|
+| `wg-policy-lib.sh` | `/usr/local/bin/wg-policy-lib.sh` | Shared library and core validation tools. |
+| `wg-sync-policy.sh` | `/usr/local/bin/wg-sync-policy.sh` | Extracts config into atomic JSON format. |
+| `wg-policy-engine.sh` | `/usr/local/bin/wg-policy-engine.sh` | Translates JSON into iptables & ipset logic. |
+| `wg-policy-cleanup.sh` | `/usr/local/bin/wg-policy-cleanup.sh` | Reverts and cleans up all firewall traces safely. |
+| `wg-sync-watch.sh` | `/usr/local/bin/wg-sync-watch.sh` | Debounced file watcher (daemon). |
+| `wg-policy-ctl` | `/usr/local/bin/wg-policy-ctl` | Handy command-line interface tool. |
+
+Make sure they are executable:
+```bash
+chmod +x /usr/local/bin/wg-*.sh /usr/local/bin/wg-policy-ctl
+```
+
+---
+
+## ⚙️ Integrasi ke `wg0.conf`
+
+To integrate the engine, you need to append hooks into your `wg0.conf` interface block, and declare the `#Access` tags under each peer.
+
+### 1. Interface Block (Hooks)
+Add the `PostUp` and `PostDown` scripts so the engine initializes correctly during VPN startup and removes traces upon shutdown.
+
+```ini
+[Interface]
+Address = 10.0.0.1/24
+ListenPort = 51820
+PrivateKey = <SERVER_PRIVATE_KEY>
+
+# PostUp: sync policy + apply engine
+PostUp = /usr/local/bin/wg-sync-policy.sh && /usr/local/bin/wg-policy-engine.sh
+
+# PostDown: safe cleanup
+PostDown = /usr/local/bin/wg-policy-cleanup.sh
+```
+
+### 2. Peer Block (`#Access` Tags)
+For each client, use the `#Access` comment line. Define the destinations (targets) the peer is allowed to access. You can separate multiple IPs or CIDRs with commas or semicolons.
+
+```ini
+[Peer]
+PublicKey = <CLIENT_1_PUBKEY>
+AllowedIPs = 10.0.0.2/32
+#Access 192.168.1.10/32, 192.168.12.0/24
+
+[Peer]
+PublicKey = <CLIENT_2_PUBKEY>
+AllowedIPs = 10.0.0.3/32
+#Access = 10.0.0.1/32
+
+[Peer]
+PublicKey = <CLIENT_3_PUBKEY>
+AllowedIPs = 10.0.0.4/32
+#Access 
+# ^ (Empty Access implies internet-only, client isolation applies)
+```
+
+**⚠️ Important constraint:** Why `#Access` instead of just using `AllowedIPs` directly? 
+WireGuard uses `AllowedIPs` for Cryptokey Routing (deciding which tunnel interface to route outbound packets). If you put an internal server IP inside the server's `wg0.conf` AllowedIPs block, WireGuard will aggressively capture and redirect packets bound for that internal server into the VPN client's tunnel. The `#Access` comment separates routing parameters from firewall parameters cleanly.
+
+---
+
+## 🛠 `wg-policy-ctl` CLI Usage
+
+You don't need to manually interact with `iptables` or `.json` files. Use the `wg-policy-ctl` wrapper.
+
+```bash
+# View the health of the firewall engine and active locks
+wg-policy-ctl status
+
+# View the raw, parsed JSON policy
+wg-policy-ctl policy
+
+# Inspect active iptables rules
+wg-policy-ctl rules
+
+# Check memory sets mapping IP targets (ipset)
+wg-policy-ctl ipset
+
+# Manually re-sync rules immediately
+wg-policy-ctl reload
+
+# Inspect dropped packets (rate-limited log output)
+wg-policy-ctl log
+
+# See connection statistics, how many targets loaded
+wg-policy-ctl stats
+
+# Force validation of the policy schema
+wg-policy-ctl validate
+```
+
+---
+
+## 🔧 Systemd Integration (Watcher Daemon)
+
+If you are using the daemon mode to auto-sync changes instantly upon editing `wg0.conf` (without needing to run `wg-policy-ctl reload` or restarting the interface).
+
+Enable the systemd services:
+```bash
+systemctl daemon-reload
+systemctl enable wg-policy.service
+systemctl enable wg-policy-health.timer
+systemctl start wg-policy.service
+systemctl start wg-policy-health.timer
+```
+
+Check the watcher logs:
+```bash
+journalctl -u wg-policy.service -f
+```